压滤机专用泵资讯 主页 > 资讯中心 > 压滤机专用泵资讯 >

压滤机专用泵该怎么维修保养

本文来源 : 威尼斯官方网站 发布时间 : 2019-04-04 10:22

  1.定期更换新油,一般每隔2-3月更换一次就可以了;

 
 
  2.填进料密封以后,一定要定期检查轴封水的泄漏量是多少,严密监视,若泄漏量超过规定的则视为泄漏严重,这时就应该及时调节填料压盖或换新的盘根,一定要保证外接水一滴一滴的泄漏;
 
  3.双端面机械密封时,定期检测水箱水位和水的浑浊程度,如果水位降低或者水比较浑浊,一定要立即加水或换新干净水;
 
  4.如果压滤机泵在冬季长时间不使用,这时就需要关闭进口阀门,启动泵,让其空转几分钟,排掉泵内残余浆液,防止泵体发生冻裂现象;
 
  1. Regularly replace the new oil, usually every 2-3 months to replace it;
 
  2. After filling the material seal, be sure to check the leakage of the shaft seal water regularly and closely monitor it. If the leakage exceeds the specified value, it is considered to be a serious leak. At this time, the packing gland or the new one should be adjusted in time. Root, we must ensure that the leakage of external water drops one by one;
 
  3. When the double-face mechanical seal is used, the water level of the water tank and the turbidity of the water are regularly checked. If the water level is lowered or the water is turbid, it is necessary to add water or replace it with fresh water immediately;
 
  4. If the filter press pump is not used for a long time in winter, it is necessary to close the inlet valve, start the pump, let it idle for a few minutes, drain the residual slurry in the pump to prevent the pump body from freezing and cracking;

相关资讯推荐:

上一篇:压滤机专用泵在使用时的关键注意点 下一篇:板框压滤机送料泵的日常维护与保养

推荐产品 more +

服务热线 13891481115
? 压滤机_全自动压滤机_厢式压滤机_板框压滤机_隔膜压滤机_威尼斯官方网站 ?
XML 地图 | Sitemap 地图
XML 地图 | Sitemap 地图
XML 地图 | Sitemap 地图